What is ASR1000 SIP40?

What is ASR1000 SIP40?

The Cisco ASR1000-SIP40 supports upto 40 Gbps total bandwidth for the four SPA bays and 46 Gbps sustained through carrier card when utilizing two four-link 6.25 GHz ESIs. It supports online-insertion-and-removal (OIR) of all SIP-10 SPAs and Cisco ASR1000-SIP40.

What is ESP in ASR?

ASR – Anti Slip regulation – brakes a front drive wheel that looses traction when you stomp on the gas via the ABS system. ESP – Electronic stability control – Controls the car in when it gets into a spin condition by braking a wheel (any 4) It has a yaw sensor and steering angle sensor.

What is difference between ISR and ASR routers?

The biggest difference between Cisco ASR and ISR routers is that ASR routers are for enterprises and service providers, whereas ISR are for customers with small- or medium-sized networks. In terms of similarities, both Cisco ASR and ISR routers offer secure WAN connectivity.

What is SIP card in Cisco?

A SIP is a carrier card that inserts into a router slot like a line card. It provides no network connectivity on its own. • A SIP contains one or more subslots, which are used to house one or more SPAs. The SPA provides interface ports for network connectivity.

What is ASR warning light?

The ASR warning light will illuminate when the system is commanded not to function, either through the “ASR Off” switch, or if there is a fault in the system. When the light comes on while driving, it does not mean there is a DTC in the system. It means there is a problem with traction at that time.

What should ESP prevent in addition to ABS and ASR?

The ESP is a very important safety feature of your vehicle as it prevents or at least mitigates the effects of skidding. In addition, the ESP also prevents the wheels from spinning when starting the car if the driver is stepping on the gas pedal too hard.

Why we use ASR router?

ASR stands for Aggregation Services Router. Routers in this series are used primarily for edge routing. They are ideal for high bandwidth applications, such as streaming audio or video, or video conferencing. The ASR 9000 Series has core routing capabilities as well.

What does ISR router mean?

integrated service router
An IP router, ISR router, or network router, is a networking device that forwards information between digital networks. The acronym “ISR” stands for integrated service router.

What is SIP ASR?

The Cisco ASR 9000 Series SPA Interface Processor (SIP) extends the unprecedented scale and flexibility of Cisco’s flagship edge router. Finally, the Cisco ASR 9000 Series is designed to simplify and enhance the operational and deployment aspects of service-delivery networks.

What is SPA slot?

Shared Port Adapters A SPA is a modular type of port adapter that inserts into a subslot of a compatible SIP carrier card to provide network connectivity and increased interface port density. Each SPA provides a certain number of connectors, or ports, that are the interfaces to one or more networks.

How does ASR work?

Each phoneme is like a chain link and by analyzing them in sequence, starting from the first phoneme, the ASR software uses statistical probability analysis to deduce whole words and then from there, complete sentences. Your ASR, now having “understood” your words, can respond to you in a meaningful way.

How do I connect AC power to the Cisco ASR 1002 router?

To connect AC power to the Cisco ASR 1002 Router, follow these steps: At the rear of the router, check that the power switch is in the Off (O) position. Insert the AC power cable into the power supply AC inlet. To ensure that the AC power cord does not interfere with other cables or wires, dress the AC power cable in one of the following ways.

Why are the AC power supply LEDs on the ASR 1002 not illuminated?

Table 1 describes the AC power supply LEDs on the Cisco ASR 1002 Router. The AC input voltage is greater than 85V. If the LED is not illuminated, then either the input voltage is less than 70V, or the power supply is turned off. If the AC input voltage is between 70V and 85V, the INPUT OK LED can be on, off, or flashing.

How do I remove a +24V DC power supply from ASR 1002?

Before you can remove a +24V DC power supply from the Cisco ASR 1002 Router, you must remove input power going to the power supply. Caution Make certain that the chassis ground lead wire is connected before you begin removing and installing the power supply.

What size rack mount does the ASR 1002 have?

Cisco ASR 1002 Router is designed for standalone, two rail 19-inch rack-mount (front rail only), four rail 19-inch rack-mount (front and rear rail). Although rack-mounting is the preferred method of installation for the Cisco ASR 1002 Router, you can mount the chassis on an equipment shelf or tabletop.