How much HP does a International 674 have?

How much HP does a International 674 have?

International Harvester 674

International Harvester 674 Power
Drawbar (tested): 54.45 hp 40.6 kW
PTO (tested): 61.56 hp 45.9 kW
power test details …

How much does an international 674 weigh?

International Harvester 674 Dimensions

Wheelbase: 84.4 inches 214 cm
Height: 91 inches 231 cm
Operating weight: 5,650 lbs 2562 kg
Ballasted weight: 8,690 lbs 3941 kg

Where is serial number on international tractor?

First and foremost is the tractor serial number, which is stamped into an aluminum plate located on the right side of your tractor, on the steering gear housing.

What is IH tractors?

IH Farmall Tractors. International Harvester (IH) began the decade of the 50s as the dominant tractor manufacturer in the world, and they continued to introduce new and better models through the ’60s.

How many horsepower is a 454 International tractor?

International Harvester 454

International Harvester 454 Power
Engine: 50 hp 37.3 kW
PTO (claimed): 40 hp 29.8 kW
Drawbar (tested): 35.35 hp 26.4 kW
PTO (tested): 40.86 hp 30.5 kW

How many horsepower is a 684 International tractor?

International Harvester 684

International Harvester 684 Power
Engine: 69 hp 51.5 kW
Drawbar (claimed): 55.9 hp 41.7 kW
PTO (claimed): 62.5 hp 46.6 kW
Plows: 4

How do I find out what year my international tractor is?

To determine the year, look at the last letter in the series. Add the number of that letter’s place in the alphabet (A = 1, B = 2, C = 3, and so on) to 1930 to determine the year.

How do you tell what year a tractor is?

Identify the letter and numbers in positions nine through 12 in a 17-symbol VIN. In order, these identify the security code, calender year of manufacture, transmission code, and wheel or track designation. The calender year of manufacture will be denoted by an A for 2010, B for 2011 and so on.

Are International tractors still made?

The letter series tractors were updated to the “super” series in 1953 (with the exception of the A, which had become a “super” in 1947, and the B and BN, which were discontinued in 1948). Many of these tractors (especially the largest, the H, M, and W models) are still in operation on farms today.

What year is my international tractor?

How much is a Farmall H worth?

First things first: this really is an incredible selling price for a Farmall H! There are plenty of Farmall H tractors still around – hundreds of thousands were produced, and here in Michigan you can usually by a Farmall H for as little as $1,000.

Do tractors have titles?

Farm tractors are not titled or registered because they have a lower rate of theft and fraud, compared to motor vehicles. Vehicle titles in the United States are commonly issued by the Secretary of State in the state the vehicle was purchased by the Department of Motor Vehicles.

What kind of engine does an International Harvester 674 have?

The International Harvester 674 is equipped with one of two engines: a 3.9 L (239.0 cu·in) four-cylinder diesel engine or a 3.3 L (200.3 cu·in) four-cylinder gasoline engine and a gear-type transmission with 8 forward and 4 reverse gears and dry disc clutch. The tractor could be equipped with the following engines: International Harvester D239.

What is the compression ratio of the IH 674?

The compression ratio rating is 7.3:1. The IH 674 is equipped with hydrostatic power steering, hydraulic wet disc brakes, open operator station, and 75.7 liters (20 US gal.; 16.7 Imp. gal) fuel tank.

What kind of engine does International Harvester D239 have?

International Harvester D239. It is a 3.9 L, 3,916 cm 2, (239.0 cu·in) four-cylinder natural aspirated diesel engine with 98.0 mm (3.86 in) of the cylinder bore and 129.0 mm (5.08 in) of the piston stroke. The compression ratio rating is 16:1.

What kind of tractor is a Steiger 620 Quadtrac?

The Steiger 620 Quadtrac is the culmination of decades of innovation, and combines the best of Case IH’s Steiger tractors and its Quadtrac independent four-track design. The 6R Series’ new Loader Technology Package is designed to streamline operators’ workloads while performing repetitive loader tasks so they can focus on the job at hand.