How do I reset my Cisco phone to factory settings?

How do I reset my Cisco phone to factory settings?

Press and hold # button while plugging the phone back in. Press 123456789*0# in sequence. After you press these buttons, the phone goes through the factory reset process.

How do I reset my Cisco IP Phone 7940 to factory settings?

  1. Step 1 How to reset Cisco 7940 / 7960 IP phone to factory defaults.
  2. Immediately press and hold # and while the Headset, Mute, and Speaker buttons begin to flash in sequence, release #.
  3. Press 123456789*0# within 60 seconds after the Headset, Mute, and Speaker buttons begin to flash.

How do I reset my Cisco phone to 9971?

You need to start over and press 123456789*0# in sequence again. After you press these buttons, the phone goes through the factory reset process.

How do I reset my Cisco phone 7821?

How to Reset Cisco 7821 TP Phone to the Factory Default

  1. Step by step procedure –
  2. Step 1 – Unplug the phone:
  3. Step 2 – Wait 5 seconds.
  4. Step 3 – Press and hold # and plug the phone back in.

How do you reset a Cisco phone?

Unplug the power cable from the phone, and then plug in the cable again: the phone begins its power up cycle. The Headset/Mute & Speaker buttons flash in sequence indicating you may enter the reset key sequence. Press 123456789*0# within 60 seconds after the Headset, Mute, and Speaker buttons begin to flash.

How do I reset my Cisco IP Phone 7970?

Cisco 7941, 7961, 7965, 7970 and 7971

  1. Hold # while you plug it in.
  2. When the line indicator buttons illuminate in sequence, release the # button and press 123456789*0# in order.
  3. The screen will turn “black” and the phone will reset to factory defaults.

How do I reset my IP Phone 7945?

Resolution/Steps

  1. Unplug the power cable from the IP phone and then plug it back in.
  2. While the phone is powering up, and before the Speaker button flashes on and off, press and hold the hash # key.
  3. Continue to hold # until each line button (right of the LCD screen) flashes on and off in sequence in orange color.

How do I reset my 7941 phone?

Cisco 7941 / 7961 phone Factory Reset: Press 123456789*0# within 60 seconds after the Headset, Mute, and Speaker buttons begin to flash. If you repeat a key within the sequence, eg: 1223456789*0#, the sequence is still accepted and the phone resets.

How do I reset my password on my Cisco IP Phone 7941?

How to Reset the Password on a 7941 Series Cisco IP Phone

  1. Hold down the “#” button.
  2. Release the “#” only when the Headset, Mute and Speaker buttons have all flashed.
  3. Wait while the phone resets.
  4. Enter the factory default password.
  5. Enter a new password when prompted.

How do I hard reset my 9971?

Cisco 9971 Factory Reset Admin Password Removal – [Timing is the answer]

  1. Unplug your phone.
  2. Press the # key.
  3. Now when you see the MUTE light turn on (RED)
  4. Begin to Key in the sequence 123456789*0#
  5. The phone will restart and then you will have a clean CP-9971 Phone.

How do you restart a Cisco phone?

Step 1 Unplug the power cable from the phone and then plug it back in.

  • The phone begins its power up cycle.
  • Step 2 Immediately press and hold#while the Headset,Mute,and Speaker buttons turn on and off in sequence.
  • Release#after the Speaker button turns off.

    • How to restart Cisco phone?

    Performing: From the Settings menu,unlock phone options then press the Erase softkey.

  • Explanation: Resets user and network configuration settings to their default values,deletes the CTL file from the phone,and restarts the phone.
  • Performing: From the Network Configuration menu,unlock phone options then press the Erase softkey.

    • How to reset Cisco IP phone to the factory default?

    Objective. Resetting the Cisco IP Phone 7800 Series and Cisco IP Phone 8800 Series to default setting lets you revert all the settings of the phone to factory default settings.

  • Applicable Devices
  • Factory Reset the IP Phone from the Phone Menu. Press the Applications button on the front of the phone.
  • Reset the IP Phone Using the Keypad.

    • How do you reset a Cisco IP phone?

    Power off the phone (if using inline power,just remove the ethernet).

  • Hold the#key down.
  • Power on the phone while still holding down the#key.
  • When the line buttons scroll down orange,you can take your finger off the hash button
  • Press the following buttons: 3491672850*#
  • The line buttons should continue to scroll,but now they should be red