Why is Sony select not working?

Why is Sony select not working?

They are bugs with the OS. In your case you should be lucky, just disable that useless app in Settings (go to Settings/Apps in system apps select Sony Select and then disable it. The option should be there) and forget about it. Otherwise you may try clearing its data in the same settings.

Why are my Apps not working on Sony TV?

If Sony Bravia TV apps won’t load, consider restarting your TV. Or, power-cycle the device and try again. Another solution is to uninstall the application and reinstall it. The last resort will be to factory reset your TV and install new apps.

Where is Sony Select on my TV?

  1. Press the [HOME] button, then select [Settings]
  2. Select [Network or Network Setup]
  3. Select [Refresh Internet Content]

How do you reset Apps on Sony TV?

  1. On the supplied remote control, press the HOME button.
  2. Select Settings.
  3. Select See all apps.
  4. Under See all apps, select an app you would like to clear data and cache.
  5. On the selected app, pull down the menu, and select Clear data or Clear cache.
  6. Press the Enter button.

How do I reset my Sony Bravia remote?

Reset the TV with the remote control

  1. Point the remote control to the illumination LED or status LED and press and hold the POWER button of the remote control for about 5 seconds, or until a message Power off appears.
  2. The TV should restart automatically.
  3. TV reset operation is complete.

Why does my Sony TV say Netflix not available?

It typically indicates that your Sony Bravia hasn’t fully connected to the internet. Try waiting an extra minute and relaunching the Netflix app.

How do I reboot my Sony Bravia TV?

Perform a power reset using the remote control

  1. On the supplied IR remote control, press and hold the POWER button for about five seconds until Power off appears on the TV screen. Note: The TV automatically turns off and then turns back on after one minute.
  2. Verify if it resolves the issue.

Why is my smart TV apps not working?

A soft reset shuts the TV down completely and reboots it, rather than placing it just into standby mode. This can solve issues that you may be having with apps. Press and hold the power button on your remote until the TV turns off and on again. This should only take about 5 seconds.

How do I turn on my Sony select?

Add the Featured Apps Section

  1. On the supplied remote control, press the HOME button.
  2. On the HOME menu, select Settings.
  3. Under the TV category, select Apps.
  4. Under the Apps category, select System apps.
  5. Under the System apps, look for SonyShelf.
  6. Select Notifications.
  7. Set it to On.

How do I access Sony select?

Run the Internet Browser App

  1. On you remote control, press the HOME or MENU button.
  2. Select Apps or Applications. If the Internet Browser icon isn’t displayed, go to All Apps or All Applications.
  3. Select Internet Browser.
  4. Press the. button.
  5. To exit the browser, press MENU or HOME button.

How do I reboot my Sony Smart TV?

How do I fix my Sony Smart TV?

Unplug the TVs power cord from the electrical outlet. Wait for 10 seconds. Plug the power cord back into the electrical outlet. Turn the TV back on….

  1. Push the Home button on your remote.
  2. Select Settings.
  3. Select About.
  4. Select Restart.
  5. Confirm you want to Restart.

What to do if the Sony Visual Communication camera is missing?

Method 1: If Sony Visual Communication Camera is missing, follow the procedure below to resolve the issue: On the menu bar, click Action. Click to select Scan for hardware changes . NOTES: Scan for hardware changes will automatically detect the camera hardware and install the necessary driver.

Does the Sony kd-55x8509c remote work with the TV Guide?

Join now – be part of our community! I have a Sony KD-55X8509C tv and the Sony remote for it worked perfectly until recently. The remote works perfectly for everything else except the tv guide. When I press guide on the remote, up pops a screen guide titled Guide – Streaming channels.

How do I scan for hardware changes on my Sony camera?

Depending on the state of the Sony Visual Communication Camera device listed under Imaging devices, perform one of the following procedures. On the menu bar, click Action. Click to select Scan for hardware changes . Scan for hardware changes will automatically detect the camera hardware and install the necessary driver.

How do I connect my Sony Bravia TV to my TV?

1 On the TV remote control, press the HOME button to display the XMB menu. 2 Press the left arrow or right arrow to select the External Inputs icon. 3 Press the up arrow or down arrow button to select the desired HDMI input on the BRAVIA Input Link. 4 Press the Select button [FIG. 1].