What causes ghosting in a gas fireplace?

What causes ghosting in a gas fireplace?

There are certain situations which result in incomplete combustion and therefore ghosting, including: Artificial logs incorrectly placed in a gas fireplace, causing flames to impinge on a cold surface. Gas pressure that is either too low, too high, or intermittent.

How do I make my gas fireplace flame better?

Turn the key valve counterclockwise as far as it will turn to open the gas line. Start the fire by following your gas fireplace lighting instructions. Turn the gas control knob to high to increase the flames in your fireplace if applicable.

What is a gas fireplace chase?

What is a chase, you ask? For direct vent gas fireplaces, it is an insulated structure that houses the fireplace. Built according to careful specifications, a chase can either be added to the exterior of the home (a mini-chase), or installed into the living space (a reverse or interior chase).

How do you fix thermal tracking ghosting?

If thermal tracking occurs in your home, you can try scrubbing the walls and ceiling with a mild cleaner to remove the stain. If that doesn’t work, you may need to sand and repaint the surfaces. But that’s only half the job. You also want to make sure this “ghost” doesn’t reappear in the future.

What is Wall ghosting?

“Ghosting,” to a builder or painter, refers to apparently unexplainable dark streaks or patches on walls, ceilings, and carpets. In this situation, ghosts indicate studs, joists, wall headers, or even individual sheetrock screws, which are naturally poor insulators.

How do you adjust the airflow on a gas fireplace?

Adjust the Air shutter if the Air to Fuel mixture is not correct:

  1. Flame is Yellow or orange producing soot ( low air leading to a rich flame) – Introduce more air by turning clockwise.
  2. Flame is very blue (too much air) – Reduce the air by turning counter clockwise.

Should fireplace chase be insulated?

“If the climate in your area is very cold, insulate the chase to the top to keep the chimney warmer, increase the draft, and reduce creosote buildup. We also recommend to insulate the ceiling of the chase just as if it were in the attic space.

What color should a gas flame be?

A healthy gas flame will burn steadily with a yellow or orange. If the flame is not yellow or orange it may be a sign that your gas fireplace needs adjusting or cleaning, which should be done by a qualified technician, such as those we have at Kozy Heat.

How to adjust the flame color on a gas fireplace?

To adjust a gas fireplace’s flame color, follow these steps. How To Get The Most Heat From A Multi Fuel Stove? 1. Find the Gas Log Control Knob Light the gas logs by turning on the pilot knob. Allow it a couple of minutes while monitoring the color of the flames. If when it’s first turned on, the flames are mostly blue, that’s normal.

How do you light a gas fire in a gas fireplace?

Light the gas logs by turning on the pilot knob. Allow it a couple of minutes while monitoring the color of the flames. If when it’s first turned on, the flames are mostly blue, that’s normal. After the particles and dust is burned off, the yellow and orange tips to the flames should be visible.

Why do gas fireplaces have blue flames?

You’ve probably heard that blue flames are safe and healthy flames. This is true for most gas-burning appliances. However, when gas fireplaces were designed, they considered that a user is probably craving the wood-burning look and feel, without the mess. That’s why gas fireplaces have a flame whose tips are a yellow or orange color.

Are yellow flames safe in a gas fireplace?

You can get more flames by turning the key valve to high. This will open the gas line so you can increase the flames and their height in the fireplace. I thought only blue flames were safe, are yellow flames safe in my gas fireplace? Yes!