What apps work with Veepeak?

What apps work with Veepeak?

Android: Torque Pro, Car Scanner, etc. Android: Torque Pro, Car Scanner, OBD Fusion, DashCommand, etc. Torque Pro (Android only), Car Scanner, OBD Fusion, FourStroke, etc.

How do I use OBD2 on my laptop?

Connect the OBD-II scan cable from the laptop to the diagnostic port on your vehicle, usually located in the driver’s side foot well, below the steering well. Click the “Scan” button on the control interface, if required. View the engine codes and diagnostic information provided by the program.

Does Veepeak work with Bimmercode?

The adapter works with Bimmercode and various OBDII apps well. Its fast and hooks up easily.

Does Veepeak work with iOS?

Compatible with iOS (no Bluetooth pairing needed; connect in the app) & Android devices (head units not recommended). Easy to plug in and unplug. No complex settings or tricky connections plus much lower power consumption compared to WiFi, and it does not block internet access for other apps.

How do I connect my laptop to my car ECU?

Connecting to the ECU The diagnostic socket is always sited inside the car’s cabin and within one metre of the steering wheel. Connect the other end of the interface cable to a free USB port on your laptop. Insert the vehicle interface cable into the car’s diagnostic socket.

How to connect OBDII to Wi-Fi in a car?

First of all make sure, that you have OBDII ELM327 adapter with Wi-Fi connection type. You should plug it inside the diagnostic socket in your car (known as “OBDII socket”) and turn on ignition or start the engine. If your adapter has a power button on it’s body – press it.

What is an OBD2 port on a car?

Most automobiles you on the road today all have an on-board diagnostics, or an OBD2 port which provides access to all the data from the engine control unit (ECU). With the data, a technician can determine the car’s problems and see if maintenance is required.

What port does OBD dash use for Wi-Fi OBD?

By default, OBD dash pre-configured the Wi-Fi OBD interface to use 192.168.0.10 and Port 35000. This configuration should work for most Wi-Fi OBD adapter on the market. However if your OBD adapter uses different IP address or port, OBD dash can be reconfigured to different address and port.

How do I connect my OBD2 to my tablet/PC?

Insert the OBD adapter to the vehicle’s OBD port. Turn ignition to ON position (engine not running), the OBD adapter should be powered up. Open your tablet/PC/phone’s Wi-Fi setting, search for WiFi access point near by. You should see something like WiFi OBDII, V-Link, OBDLink etc, (basically anything sounds like from your OBD WiFi adapter.