Will AX15 replace AX5?
You can now install the AX15 in place of the AX5 to gain some drivetrain strength. The nice thing is that when you”™re ready to replace the 4 cylinder with a larger V6 or V8, the AX15 is an ideal transmission for the power increase.
What jeeps came with AX15 transmission?
The AX15 built by Aisin was used in Jeeps with the AMC 242 (4.0L) Inline 6 engine, as well as the AMC 258 (4.2L) Inline 6 engine and AMC (2.5L) Straight 4 engine. This included vehicles such as the Cherokee(XJ), Comanche (MJ), and Wrangler (YJ and TJ) as well as the 2nd generation of the Dodge Dakota.
What year is AX15?
The Aisin-Warner AX15 transmission is a very successful, medium-duty, standard shift, five-speed transmission. It was introduced in the 1988 (mid-year) YJ Wrangler and XJ / MJ Cherokee / Comanche Jeeps, and found in 1989*-1999 Jeep XJ, YJ, and TJ models.
Is the AX5 a good transmission?
The AX5 is prevalent, but sadly it’s strength is minimal, making it a questionable off-road transmission. Failures behind even stock engines are not uncommon.
How much torque can a AX15 handle?
It’s rated for 300ft-lbs on the dot.
Who makes the AX5 transmission?
The AX5 transmission was a manual 5 speed transmission manufactured by the Aisin Corporation of Japan. The AX5 was predominately used in the Jeep Wrangler and early XJ Cherokees. The transmission was first introduced behind the 2.8 V6 Cherokee as early as 1984.
Who makes AX15 transmission?
The Aisin-Warner AX15 is a split-case five-speed transmission built by Aisin and used in vehicles with AMC and Mopar 4.0/4.2-L I6 engines.
Who made the AX5 transmission?
What vehicles have a AX5 transmission?
The Aisin Warner AX5 transmission was a standard shift, five-speed transmission introduced in the 1984 XJ Cherokee Jeep, and found in the 1984 to 2006 Jeep XJ, YJ, and TJ models. It is a light-duty transmission found behind the AMC 150 (2.5L) I4 engine. It was also found behind the GM 2.8L 60 degree V6 (early XJ only).
Will AX15 handle V8?
This AX15 / NV3550 bellhousing produced for the 4.0L in Jeeps from 1994-2006 will work across this array of AMC I6 and V8 engines.
How much does an AX15 transmission weight?
The standalone weight of the AX15 transmission is 110 lbs.
When did The AX5 transmission come out in the Jeep?
Aisin-Warner AX5 Transmission. The Aisin Warner AX5 transmission was a standard shift, five-speed transmission introduced in the 1984 XJ Cherokee Jeep, and found in the 1984 to 2006 Jeep XJ, YJ, and TJ models.
What type of transmission is the AX15?
The AX15 is a split-case, top shifting, overdrive transmission with the shifter being located in the rear section of the transmission. The AX15 is fully synchronized in all gears.
What is the difference between a jeep AX15 and AX5?
1989 to 1991 AX15 input shafts have a smaller (~19/32″) pilot tip. 1992-1999 AX15’s have a larger (~3/4″) pilot tip. The AX15 looks similar to the AX5 and they are occasionally confused in identification as well as interchange. The Jeep AX15 was factory-married to the Jeep New Process (aka New Venture) Model 231 transfer case.
Can the AX15 be used on a V8 engine?
The AX15 actually makes a very clean conversion to most GM engines and because it is a stronger transmission, it is well matched for the Chevy V6 and Chevy Small Block V8 and Gen. III+ V8 engines. Details on these conversions can be found here. You may also find the following articles of interest: