Can you face nail vinyl fascia?
For the best appearance, we suggest that you do not face nail aluminum fascia. The recommended procedure is to slip the top edge of the fascia into the drip edge (or other installed trim) and secure the fascia in place with nails or screws installed through the bottom side (Fig. 1).
How do you install vinyl fascia over wood?
Place a J-channel along the wall and nail it to the underside of your soffit plywood every foot and a half. You will then cut the new vinyl soffit pieces and slide them into the J-channel, nailing the opposite side into the wooden fascia board. This should hold the soffit in place until you can install the fascia.
Can you replace wood fascia with vinyl?
While there are short-term costs to replacing wood soffits with vinyl, in the long-term, you’ll see reduced upkeep and repair expenses. While painted wood peels over time, the color on vinyl soffit is embedded in the material, so you will not need to repaint the soffit.
What is the difference between F Channel and J channel?
F channel is usually attached to beams or studs of the house, along the underside of the roof overhang. It provides a sort of shelf where the ends of the soffit pieces rest. If you choose J channel, you’ll have to install twice as many pieces, both to hold up the soffit and to cover the edges.
Should I wrap my fascia?
Adding wrap to old fascia board is not a viable way to squeeze more life out of your fascia. Wrapping your fascia board can help it last two to three times longer than it would otherwise. However, if you don’t have drip edge then wrapping will make it worse.
How to wrap fascia board with vinyl?
Vinyl fascia strips
What type of wood is best for fascia?
– Choose the best wood. Handpick each wood fascia board and make sure it’s from a species of wood that’s naturally decay resistant. – Watch where you nail your fascia. If at all possible, never nail a fascia board near the edge of the end grain. – Use the best nails. – Paint the ends of your fascia boards.
How much does it cost to repair fascia and soffit?
Soffit and fascia repair jobs cost between $600 and $6,000. Soffit and Fascia Repair Cost Breakdown Qualified soffit and fascia pros typically give estimates free of charge, so you can figure out how much repair is necessary.
How to install vinyl soffit and fascia?
Remove all of the gutters and downspouts from your home.