How do I print a test page on my HP LaserJet printer?

How do I print a test page on my HP LaserJet printer?

HP LaserJet Pro Printers – Printing a Self-Test Page

  1. Press and hold the Cancel button until the Ready light blinks.
  2. Release the Cancel button . The Self Test/Device Configuration page prints. Figure : Self Test/Device Configuration page.

How do I find my HP printer configuration page?

From the Home screen on the printer control panel, swipe right to navigate, and then touch Reports. From the Reports menu, touch Configuration/Status Pages. Select the Configuration Page item, and then touch the Print button to print the Configuration pages.

How do I print a test page on HP LaserJet p1102?

Print a Self Test/Device Configuration page through the control panel (HP LaserJet Pro M12w, P1102w, and P1109w printers)

  1. Press and hold the Cancel button until the Ready light blinks.
  2. Release the Cancel button . The Self Test/Device Configuration page prints. Figure : Self Test/Device Configuration page.

How do I reset my HP PSC 1350 printer?

Perform a power reset.

  1. Press the On/Resume button ( ) to turn on the product.
  2. With the product turned on, disconnect the power cord from the rear of the product.
  3. Unplug the power cord from the wall outlet.
  4. Wait at least 15 seconds.
  5. Plug the power cord back into the wall outlet.

How do I print a clean page?

Print a cleaning page Print Press the down arrow ( ) to highlight Print Quality, and then press OK. Press the down arrow ( ) to highlight Create Cleaning Page or Process Cleaning Page, and then press OK. When prompted, load copier-grade paper (not bond, heavy, or rough paper), and then press OK.

Why does my laser printer leaving streaks on the page?

Streaking is usually caused by a worn out drum unit or spent toner cartridge. Remove the cartridge and rock it back and forth a few times over a trashcan to evenly redistribute the toner powder. Some toner powder may emit from the cartridge as you do this.

How do I get my HP printer information sheet?

Press the HP ePrint icon on your control panel display, then press Print or Print Info to print the Printer Info Page. The code is active even if the page does not print.

How do I print a test page on HP LaserJet p1006?

Printing a configuration page in Windows

  1. Make sure that the printer is idle and the Ready light is on.
  2. Load the plain white paper in the input tray.
  3. Access the product Properties dialog box.
  4. Click the Services tab.
  5. Select Config from the Print Information Pages drop-down menu.
  6. Click Print.

Where is the network configuration page?

On the printer control panel, press the Wireless button . The wireless menu displays. Press the button next to Settings, scroll to Print Report, and then press OK. Scroll to Configuration Page, and then press OK.