How do you change the drum on a Brother HL 2280DW?

How do you change the drum on a Brother HL 2280DW?

Replacing the drum unit Remove the toner cartridge and drum unit assembly from the machine. Push down the green lock lever and take the toner cartridge out of the drum unit. Unpack the new drum unit. Put the toner cartridge firmly into the new drum unit until you hear it lock into place.

Why does my Brother printer keep saying replace drum?

The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.

How do you reset the drum counter on a Brother HL 2280DW?

How to reset the drum counter:

  1. Make sure the machine is on, then open the front cover and push “clear” button.
  2. Confirm you are installing a new drum unit by pressing the “up” arrow.
  3. When the screen says “Accepted”, close the front cover and you can now start printing!

How do I get rid of the Replace drum message on my Brother printer?

More videos on YouTube

  1. Make sure the machine is on.
  2. Close up the front cover.
  3. Hold down the “OK” button and the “up” arrow at the same time.
  4. Press the “OK” button to select “Drum”.
  5. Select the “down” button to reset the drum counter.

How do you change a drum unit?

  1. Make sure that the machine is turned on.
  2. Open the front cover.
  3. Take out the drum unit and toner cartridge assembly.
  4. Push down the green lock lever and take the toner cartridge out of the drum unit.
  5. Unpack the new drum unit.
  6. Put the toner cartridge firmly into the new drum unit until you hear it lock into place.

How do you reset the drum on a Brother printer HL L2380DW?

How to reset the drum counter:

  1. Make sure the front cover is closed.
  2. Press the “X” on the printer to display to interrupt the “replace drum” message.
  3. Press the tool button (settings) > All Settings > Machine Info. >
  4. Hold down the # button on the keypad until the LCD message changes to the reset menu.

How do I fix the drum error on my Brother printer MFC 7840w?

How to reset Brother MFC-7840w Drum

  1. Make sure that the machine is turned on.
  2. Press Clear or Clear/Back on the control panel.
  3. Press 1 to reset the drum counter.
  4. When the LCD shows Accepted, close the front cover.

Can you reuse a Brother drum?

Some printer drum units that use the Brother TN450 toner can use up to five cartridges maximum before needing to be replaced. Others, such as the Brother TN760, need to replace their drum unit after three to four cartridges, depending on usage.

How long do Brother drums last?

Under ideal conditions, the average drum life is estimated at approximately 15,000 pages. The actual number of pages that your drum will print may be significantly less than this estimate.

What is a drum on a brother printer?

Make sure this fits by entering your model number.

  • BROTHER GENUINE DRUM UNIT: The Brother DR-730 Drum Unit is intelligently engineered as part of a complete mono laser printing system.
  • CRISP RESOLUTION: The Brother DR-730 Drum Unit delivers crisp,sharp printing with quality you can consistently rely on.

    • What is the drum on a brother printer?

    – Make sure the machine is turned on. – Open the front cover. – Press and hold OK for about two seconds to display Drum Unit, and then press OK. – Press the Up arrow key to reset the drum counter. – Close the front cover of the machine.

    How to set up wireless printing with the brother hl2270dw?

    The installation screen will appear automatically.

  • The CD-ROM main menu will appear.
  • When the License Agreement window appears,click Yes if you agree to the License Agreement.
  • Choose Wireless Network Connection and then click Next.
  • Choose Brother Peer-to-Peer Network Printer,and then click Next.

    • How to reset drum brother MFC l2740dw?

    Press (Cancel) to interrupt the error.

  • Press (Settings) > All Settings > Machine Info. > Parts Life.
  • Touch the dial pad area to light up the LEDs.
  • Press and hold#until the LCD message changes.
  • Press Drum.
  • Press Yes.
  • Press (Home).