How do I set the frequency on my DStv?

How do I set the frequency on my DStv?

Press MENU on Your DSTV Remote Control

  1. then Go to ADVANCED OPTIONS – press OK.
  2. When Prompted, you need to Enter Pin code 9949.
  3. Go to NETWORK SETUP press OK.
  4. Home Network Dstv IS20 PLEASE DO NOT CHANGE THE DEFAULT VALUES (Frequency should be 11594 and Symbol rate 27500 )
  5. Press P+ button on the remote to access new networks.

How do I set the date and time on my DStv?

Press the DStv button to bring up the main menu. Click on the advanced options and select the local time option. You can now get the option to change the time depending on your local time. Change the time using the left and right buttons on your remote.

Why is DStv not picking up channels?

If some channels are not playing on DStv, your decoder is not receiving enough signal strength to play them out. The signal strength and quality are low because of the misalignment of your dish. In some cases, poor signal quality results from misaligned LNB also.

How do I setup my DStv decoder after factory reset?

How to reset your DStv decoder

  1. Press the blue “DStv button” on your remote control.
  2. Then use the right arrow on the remote control to go to “Settings“.
  3. Use the down arrow to go to “System Settings“.
  4. Now use the right arrow to go to the next menu and select “Reset Decoder Settings“

How do I format my DStv decoder?

How to format DStv Explora

  1. Go to Settings by pressing the right arrow button.
  2. Under Settings, choose the option of System Settings.
  3. Press the arrow button once again to go to advance settings and select the option from Reset Decoder Settings.
  4. Under the drop-down menu, choose the option of Reset to Factory Defaults.

How do I change my DStv due date?

When you upgrade, you need to pay in the difference between your current package and the upgraded package for the time left until your next payment date. You can downgrade once a month on the day your subscription payment is due. You can log onto Self Service and request for us to schedule this downgrade for you.

How do I reset my DStv signal?

Fix a DStv no signal error by following the steps below:

  1. Step 1: Check your DStv connection cables. This is one of the easiest checks you can do on your own.
  2. Step 2: Reboot your decoder.
  3. Step 3: Inspect your DStv satellite dish.
  4. Step 4: Check your LNB.
  5. Step 5: Call the approved DStv installer.

How do I get missing channels on DStv?

Send an SMS with the word RESET followed by your smartcard number to 30333. You will see a confirmation message informing you that your request is being processed. After that, check if the channels are now showing.

How do I reset my DStv decoder to factory settings without remote?

Process of how to reset DStv decoder without remote First, unplug the power button from your decoder and ensure it is completely turned off. You can check for this by ensuring all its lights are turned off, and none is blinking. Turn it back on and press the reset button on your decoder.

How to troubleshoot picture quality on DStv DSD 1131/1132 decoders?

Follow the step-by-step guide to troubleshoot the picture quality on your DStv DSD 1131/1132 Decoders: Firstly, connect your DSTV decoder using RCA and NOT RF cable (in order to see the picture while tuning) Press MENU on the DStv remote control Go to Advanced Options Go to TV installation Enter PIN 9949 Go to UHF Tuning

How do I set up DStv on my TV?

To do this, press the DStv button on your remote>> then scroll left to settings>>select satellite settings>>open home network and go through the installation wizard. E.g, your primary decoder must be set as decoder one and your sec as decoder 2.

How do I troubleshoot my DStv HD Decoder?

High Definition Click/Touch the decoder image. HD Decoders Troubleshoot your DStv HD Decoder Press Menu on RCU Press Advanced options Press PIN 9949 Press Equipment Go to UHF Tuning Press the White button on RCU Change Unit frequency to 52 Press OK on RCU to save settings Press Exit until back to picture

How do I find the UHF frequency on my dsd110?

Press 4 for UHF frequency. Wait until there is a number on the front panel, i.e 46 (The DSD110 will display UH XY where XY is a two digit number). Press the right arrow until 52 gets displayed on the front panel. Don’t press OK on the DStv remote control unit.